Dallas Toilet Installation | Repair | Replacement
According to the Environmental Protection Agency, a family of four typically uses up to 400 gallons of water a day, with 70 percent of this attributed to an indoor use of water. The average American flushes a toilet five times a day. In older homes, with 3.2 gallon toilets, a family of four could use more than 20,000 gallons of water annually just flushing a toilet. For that reason, many municipalities are amending codes to require installation of a 1.28 gallon toilet for new construction or remodels. If you have a plumbing project that requires the installation of a new toilet, the licensed and insured Dallas toilet replacement professionals at Public Service Plumbers can help ensure that you comply with all building codes.
Professional Toilet Repair in Dallas
At Public Service Plumbers, we’ve provided comprehensive plumbing services to businesses and homeowners in and around the DFW Metroplex for more than 55 years. We are proud of the skill, training and loyalty of our professional team—all of our plumbers have at least 10 years of experience. Our support staff is highly knowledgeable with more than 100 years of combined plumbing experience. We’ll look at more than your toilet installation in Dallas—we’ll keep our eyes open for all potential plumbing concerns so that they can be resolved before they cause problems. We are happy to assist you with any plumbing/toilet project, large or small.
Whatever the Toilet, Our Dallas Toilet Installation Team has You Covered
In general, there are three kinds of toilet flush technology currently in use: siphoning, wash-down, and power-assisted flush. In siphoning toilets, water flows to the rim and from a jet located near the bottom of the bowel. Wash-down toilets use a valve that opens when flushed to allow a flood of water to enter the bowel from under the rim of the toilet. Power-assisted toilets utilize water and compressed air to create a powerful thrust of water to clear waste out of the bowel. In each kind of toilet, however, consideration must be given to the amount of water used. All of our plumbers have experience installing these different type of toilets and you can be sure that when you need toilet installation in Dallas our team can take care of it.
The new Texas HET Law phasing in 1.28 gallons per flush on toilets went into effect in 2014. Accordingly, if you want to remodel your bathroom or install a new toilet, you’ll need to consider different kinds of water closets and what works best for your family.
Which Toilet Makes Sense for Your Home? Our Dallas Toilet Replacement Pros Can Help Answer That
Each of these toilets has their advantages and drawbacks – siphoning typically uses a lot of water and may sometimes require two flushes; wash-down toilets often stain and require more than one flush, and power-flush toilets can be loud. On the other hand, siphoning toilets are usually very clean and easy to maintain, while power-flush toilets use a gallon or less of water per flush. Our Dallas toilet replacement team will always be happy to discuss your options with you and determine what will work best for your needs.
Call Us First When you Need Toilet Installation in Dallas
To arrange a service call with our Dallas toilet repair team or to install or replace a toilet, or to discuss pricing options, call Public Service Plumbers at 214-363-4477. We are available 24 hours a day, seven days a week to respond to your call. We respond to all warranty and service issues within 48 hours. You’ll receive a one year warranty on all parts and labor.